Modeling Tools

These are tools we have developed to be helpful to model aircraft builders. If you are interested in purchasing any of these please contact us for current pricing.

	LASER CUT PLY BUILDING TRIANGLES These are laser cut from 1/8" birch ply and include the locking base so that you can pin them to the building board available in 3", 5 1/2", and 7 1/2" in packs of ten. Call for current pricing.			LASER CUT BALSA GUSSETS Gussets have the grain running in the correct direction. Available in the following sizes: 1/2" from 1/16" sheet aprox 70 gussets 3/4" from 1/16" sheet aprox. 100 gussets 3/4" from 3/32" sheet aprox. 100 gussets 3/4" from 1/8" sheet aprox. 100 gussets 1" from 1/16" sheet aprox. 84 gussets 1" from 3/32" sheet aprox. 84 gussest 1" from 1/8" sheet aprox. 84 gussets. Call for current pricing.
	KEEP IT STRAIGHT FUSELAGE JIG MK V Upright slide up against the fuselage side to hold then vertical while you add cross pieces. Includes: 12"x36" 1/4" ply base drilled for 4:40 T nuts. Includes nuts and bolts. Call for current pricing.			STRIP CLIPS The strip clips are designed for box type fuselages where you build two sides from strip balsa. The clip holds the first side to the plan, the upper notch is then used to build the second side before removing the first from the plan. The clips are available to fit 1/16" sq to 1/4" square and come 60 to a pack. Call for current pricing.
	LASER CUT RIB GUIDES Laser cut from 1/8" birch plywood. Includes locking base so that you can pin them to the building board. 3 sizes available for 1.25" high ribs 1/16", 3/32" and 1/8" (pictured). 2 sizes for 3/32" and 1/8" ribs, 3" or 4" high. Sold in packs of 10. Call for current pricing.			SPEED 400 LASER CUT MOTOR MOUNT The mount consists of a front plate drilled for the speed 400, and a back plate slotted for the two sides. The sides may be adjusted for down thrust, side thrust, and length. Sides are available in 2" and 3" lengths. The mount is 3/32" birch ply and you just epoxy it together. Call for current pricing.